Polytechnics to Study Taxation in Nigeria

Taxation is a term use to describe the series of levies impose by government of a state, province or nation on it citizen, organisation or properties. It is an obligation and that mean the levies are compulsory, they must be paid.

Taxation as a programme of study focus on imparting students with knowledge in various taxes and the law that guide them with the aim of helping government and organising manage their tax portfolio well. 

A Higher National Diploma (HND) qualification in Taxation should be able to guide organisation in important business decision making notably in the area of  calculating tax liability, accounting administration and study and analysis legal implications.

 guide 

List of Polytechnics that Offer Taxation in Nigeria

• Ababakar Atari Ali Polytechnics

• Federal Polytechnic, Ado Ekiti 

• Federal Polytechnic, Ilaro 

• Federal Polytechnic, Nekede 

• Ogun State Institute of Technology, Igbesa

• Osun State College of Technology, Esa-Oke

All the schools mentioned above are government approved and non of them is a private polytechnics. More schools could be approved to offer the programme in future.

Share This.

Polytechnics to Study Biomedical Engineering in Nigeria

Listed on this page are the National Diploma (ND) award institutions where Biomedical Engineering Technology are taught as a programme in Nigeria.  

All of these institutions are government approved. Student who could not make the requirement to study Biomedical Engineering at one of the universities where it is taught in Nigeria could begin his career as Biomedical Engineer by study at one of the institution listed on this page the move on to a university for a degree programme. 

O'level qualifications accepted to study for the National Diploma (ND) Biomedical Engineering is a bit lower than for a degree in it: the JAMB cut off mark for polytechnics is usually lower and hence for each of the School of Biomedical Engineering.

List of Polytechnics for Biomedal Engineering

• River State College of Health Sciences and Technology (RIVCOST)  

• University of Maiduguri Teaching Hospital (UMTH) School of Biomedical

• University of Benin Teaching Hospital (UBTH) School of Biomedical Engineering  

• Lagos University Teaching Hospital (LUTH) School of Biomedical Engineering 

The schools listed here are not called polytechnic but as the school of health sciences. We refers to them as polytechnic because: 

1. They award National Diploma (ND), a traditional qualification award by the polytechnics and 
2.  Because of SEO purpose.

Share This

Polytechnics to Study Industrial and Labour Relation in Nigeria

Listed on this page are the National Diploma (ND) award institution that offer Industrial and Labour Relation in Nigeria.

Industrial and Labour Relations as a discipline is designed to train students in union-management relations, collective bargaining and in human resources management. The programme equipped students with knowledge in human resources and labour relations  organizations and their importance in an organisation and so, in the course of study students are made to understand the roles of employees, employers, labour unions and the relationship among one another and other organizations. 

Listed below are the National Diploma (ND) and Higher National Diploma (HND) award institutions where Industrial and Labour Relation is taught in Nigeria.

List of Polytechnics to Study Industrial and Labour Relation

• Federal College of Fishery and Marine Technology (FEDFISH) Lagos.

• Michael Imoudu National Institute of Labour Studies (MINILS) 

• RAMAT Polytechnic, Maiduguri. 

The institutions mentioned above are NBTE approved and so you can choose any of them in JAMB to study Industrial and Labour Relation. 

Share This

Iwo City Polytechnic Accreditation Courses and Entry Requirements

Iwo City Polytechnic is among the ten (10) existing polytechnics in Osun State. It has been around for a while and it is a private education institution, a fact that arouse concern among the prospective students whether the school is legal or that it is accredited by the appropriate government body to operate in Nigeria. 

Iwo City Polytechnic Accreditation Status 

No prospective students should fear not to apply for an admission with the institution because it is an accredited higher education institution.

One of the evidence to back this claim is that Iwo City Polytechnic is listed among the accredited schools on the website of National Board for Technical Education (NBTE), an organisation established by the Nigerian government to certify and accredit polytechnic, technical schools and  other TVET institution in Nigeria. Follow the link below to NBTE website to see Iwo City Polytechnic listed. 

https://net.nbte.gov.ng/private%20polytechnics

Iwo City Polytechnic is also well listed on JAMB. This mean that a students could chose to apply for an admission at the institution. If it had not been accredited it would not have been listed on JAMB. If you do not see Iwo City Polytechnic listed after reading this, it might mean it's accreditation had been withdrawn.  

Iwo City Polytechnic Accredited Courses 

The courses listed here are those that ICP accreditation support, at least at the time of putting up this page.

• Science Laboratory Technology 

• Computer Science 

• Accountancy 

• Computer Engineering 

• Electrical and Electronics Engineering and 

• Statistics 

More courses could be approved for the institution in future. 

Entry Requirements 

All holders of ordinary level (O'Level) result are eligible to apply to study at Iwo City Polytechnic. 

ICP accept minimum of credit pass in five relevant subjects which must include English Language and Mathematics plus making the JAMB UTME cut off mark for the Nigerian polytechnics. 

Share This

Stars Polytechnic Accreditation Courses and Entry Requirements

Stars Pokytechnics is one of the new private polytechnics established in Ota, Ogun State. The brain behind the school is Dr. Reuben Ovai, a reputed scholar with hand in the establishment of different education institutions. 

Being a newly established higher education school in Nigeria, it is not a strange thing for prospective students to want to know whether it is a legal institution accredited by the appropriate government agency.  

Accreditation Status

Yes, Stars Pokytechnics is a legal polytechnic institution established in 2016. The school was licenced by the Federal Ministry of Education and was accredited by National Board for Technical Education (NBTE) in 2020 to offer educational  service to Nigerian citizens. The following facts back the claim. 

Stars Polytechnic is named among the accredited private polytechnics in Nigeria by NBTE. Click the link below to see Stars Polytechnic listed on NBTE website. 

https://net.nbte.gov.ng/private%20polytechnics

If not there at the time of checking, it might mean the institution has lost its accreditation. 

Secondly, at the time of putting up this page the name Stars Polytechnic was in the JAMB brochure among the schools a student could choose to apply to. Illegal or non-accredited  polytechnics can't be listed in it.  

Stars Polytechnic Accredited Courses 

Listed below are the courses supported by the accreditation of the Stars Polytechnic: 

• Nautical Science 

• Computer Science 

• Electrical Electronics Engineering

• Marine Engineering 

• Business Administration 

More courses could be accredited for the institution in the future.

Stars Polytechnic Entry Requirements.

The minimum entry requirements accepted are credit passes in five relevant O'level subjects which must include Mathematics and English Language. 

Students must also make the cut of mark for JAMB's UTME.

Share This

Villanova Polytechnic Accreditation Courses and Entry Requirements

Knowing the accreditation status of Villanova Polytechnic, Imesi Ile is very important before applying to the institution because nobody want to earn a certificate that would not be recognised anywhere except the school that award it.

As a matter of fact Villanova Polytechnic is one of the legal private education institutions in Osun State of Nigeria and these following facts prove so. 

Villanova Polytechnic Accreditation Status 

Villanova Polytechnic is one of the accredited polytechnics in Nigeria listed by National Board for Technical Education (NBTE): the organisation that accredited and certified polytechnics, technical schools and all other vocational training institutions.

Click the link below to see the name of Villanova Polytechnic on NBTE website. 

https://net.nbte.gov.ng/private%20polytechnics 

Also the Nigerian Federal Ministry of Education listed Villanova Polytechnic on it website as one of the legal and accredited polytechnics it knows about.  

Click the link below to see the prove. 

https://education.gov.ng/private-polytechnics/ 

The fact that Villanova Polytechnic do appear among the list of polytechnics a student can choose from on JAMB form is another evidence to show that the school is legal and accredited in Nigeria, if not the name would not have been listed. 

What This Mean To You an Applicant 

• This mean a qualification earn at Villanova Polytechnic can be used to secure a job in Nigeria and elsewhere around the globe. 

• You can use the certificate earned from the institution to pursue higher academic degree from all well known higher institutions of learning in Nigeria and abroad. 

• Graduates of the school are eligible to participate in the mandatory one (1) year NYSC programme in Nigeria. 

The Villanova Polytechnic Accreditation Courses 

Villanova Polytechnic accreditation support the following courses at National Diploma level. 

• Computer Science  

• Computer Engineering 

• Hospitality Technology

• Business Administration

• Electrical and Electronics Engineering 

Admission Requirements

The minimum entry requirements by Villanova Polytechnic, Imesi Ile is credit passes four relevant subjects which must include English and Mathematics and an applicant for admission must get the minimum cut off mark from JAMB.

Share This

Trinity Polytechnic Uyo Accreditation and Courses

The fact that you are on this page might mean you want to know whether Trinity Polytechnic, Uyo, is legal or not. It might mean you want to know whether the polytechnic (one of the few private in Akwa Ibom) is accredited in Nigeria or not so you can make a better decisions about your future career.

Trinity Polytechnic Accreditation 

The Trinity Polytechnic, Uyo, Akwa Ibom State is a legal education institution in Nigeria. The school is accredited by the National Board of Technical Education (NBTE) a Nigerian organisation responsible for the accreditation and certication of polytechnics, technical schools and all other vocational training institutions and their courses. 

Click the link below to see Trinity Polytechnic, Uyo listed among the accredited polytechnics on NBTE website.

https://net.nbte.gov.ng/private%20polytechnics

If by the time you check, the name is not listed, it might be the school had lost it accreditation. 

Another ways to know that Trinity Polytechnic is accredited is through JAMB form. Each year, since 2016, the Trinity Polytechnic has been listed among the polytechnics a student can choice to apply to in Nigeria. 

Any polytechnic not accredited will not have it name listed in the JAMB form and so if Trinity Polytechnic doesn't appear on the list, then think twice.  

Federal Ministry of Education also has the name Trinity Polytechnic, Uyo listed on it.

Click the link below to check

https://education.gov.ng/private-polytechnics/

What This Mean 

It means: 

Certificate earned at Trinity Polytechnic can be used to apply for a job here or elsewhere sound the world. 

Graduate from the institution is recognised to participate in the mandatory one (1) NYSC programme in Nigeria. 

A product of the school can use the certificate to sought for further education at another institution in Nigeria or disposal.

 

Trinity Polytechnic Accredited Courses.

Listed below are the courses the accreditation of Trinity Polytechnic covers as at the time this page was set up.

• Accountancy
• Businesses Administration and Management
• Hospitality Management
• Leisure and Tourism
• Mass Communication
• Public Administration 
• Electrical/Electronic Engineering 
• Computer Science
• Computer Engineering
•  Estate Management
• Science Laboratory Technology
• Architecture
• Building Technology 
• Quantity Surveyor 
• Welding and Fabrication Technology and
• Statistics 

Share This

Agricultural Bio-environmental Engineering Entry Requirements Auchi Polytechnic

Agricultural and Bio-environmental Engineering Technology at Auchi Polytechnic form the part of the six (6) engineering programmes on offer at the institution School of Engineering Technology which is devoted to developing leaders in various engineering disciplines through rigorous classroom teaching, research activities and provision of excellent laboratories facilities.

On this page are listed the minimum entry requirements to study for ND and HND at the Department of Agricultural and Bio-environmental Engineering Technology, Auchi Poly and this include the WAEC and JAMB subjects combination. 

ND Admission Bio-environmental Engineering Requirements

Department of Agricultural and Bio-environmental Engineering, Auchi Polytechnic accept minimum of five (5) credit passes at one sit or six (6) credit passes at not more than two sittings of the following O'level subjects for ND programme.

WAEC Subjects Combination

• Mathematics
• English Language
• Chemistry 
• Physics and any one
• subject from:
• Biology/Agricultural Science
• Technical Drawing
• Basic Electronics/Basic Electricity
• Auto Mechanics
• Metal Work
• Further Mathematics
• English Language,
• Geography,
• Economics/Commerce.

The five or six credit passes must be at not more than two sittings from one or two of the under listed O'level qualification examinations.

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

JAMB Subjects Combination

• Physics
• Mathematics
• English Language
• Chemistry 

You may also use this subjects combination for Auchi  Polytechnic, Department of Agricultural Bio-environmental Engineering Technology post-UTME screening.

HND Admission Requirements

Study for HND Agricultural and Bio-environmental Engineering eligible students to choose one from the programme available two options:

• Farm Power and Machinery Option
• Soil and Water Option

The entry requirements include :

• National Diploma: minimum of lower credit from Auchi Polytechnic or from other NBTE accredited institution of learning.

• Evidence of participation in mandatory post-ND one year industrial training.

• Holder of pass in ND will be considered for admission but must have at least two years industry work experience and CGPA not lesser than 2.00

• An applicant from other schools must submit academic transcript from his institution.

• Minimum of five (5) O'level credit passes as of the ND as stated above. 

• JAMB admission letter to ND is required. 

Note: ND and HND are two years programme with a year break for industrial training in between.

Share This.

Civil Engineering Entry Requirements Abia State Poly

Abia State Polytechnic, School of Engineering Technology only offers four programmes among which is Civil Engineering Technology.

The school applied hand-on work to teaching and learning, imparting their students with skills needed to excel as Civil Engineering technicians or technologist able to read infrastructural project plans, construct the plans and able to effectively manage those infrastructures after completion with little or no supervision.

Listed on the page are entry requirements to study ND and HND Civil Engineering Technology at School of Engineering Technology, Abia State Polytechnic. This include the WAEC O'level and JAMB subjects combination. 

ND Civil Engineering Entry Requirements 

Department of Civil Engineering, Abia State Polytechnic accept minimum of five (5) credit passes in the following O'level subjects: 

WAEC Subjects Combination

• Mathematics 

• English Language 

• Physics

• Chemistry and one of 

• Technical Drawing

• Geography 

• Further Mathematics

• Auto Mechanic 

• Basic Electricity/Basic Electronics

• Metal Work 

• Economic/Commerce 

• Biology/Agricultural Science

The five subjects must be at not more than two sittings from one or two of the following: 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB
• Abia State Polytechnic accept pre-ND result provided it meet minimum requirement. 

Unified Tertiary Matriculation Examination (UTME)

An applicant to study Civil Engineering must make a satisfactory score in JAMB coordinated UTME and post-UTME screening for the Department of Civil Engineering, Abia State Polytechnic.

JAMB Subjects Combination

• Mathematics 
• Physics 
• Chemistry and 
• English Language 

HND Civil Engineering Entry Requirements

• All applicant for HND Civil Engineering must satisfy minimum entry requirement for ND programme as stated above.

• National Diploma (ND): minimum of lower credit with CGPA not lesser than 2.50

• Prove of completion of mandatory one (1) year post-ND industrial training.

• ND with pass not lesser than CGPA 2.00 and with industrial work experience not lesser than two years.

• Transcript from former school if an applicant  is not from Abia State Polytechnic.

Note: ND and HND Civil Engineering run for a minimum duration of two years (4 semesters) each and maximum duration of four (4) years (8 semesters)

Share This

Electrical Electronics Engineering Entry Requirements Abia State Poly

Abia State Polytechnic, School of Engineering Technology only offers four programmes among which is Electrical and Electronics Engineering Technology.

The school applied hand-on work to teaching and learning, imparting their students with skill needed to excel as Electrical and Electronics Engineering technicians able to install and do the maintenance of all electrical appliances and power systems for home, offices and factories with little or no supervision

Listed on the page is entry requirements to study ND and HND Electrical Electronics Engineering Technology at School of Engineering Technology, Abia State Polytechnic. This include the WAEC O'level and JAMB subjects combination. 

ND Electrical and Electronics Engineering Entry Requirements 

Department of Electrical and Electronics Engineering Technology, Abia State Polytechnic accept minimum of five (5) credit passes in the following O'level subjects: 

WAEC Subjects Combination

• Mathematics 

• English Language 

• Physics

• Chemistry and one of 

• Technical Drawing

• Geography 

• Further Mathematics

• Auto Mechanic 

• Basic Electricity/Basic Electronics

• Metal Work 

• Economic/Commerce 

• Biology/Agricultural Science

The five subjects must be at not more than two sittings from one or two of the following: 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB
• Abia State Polytechnic accept pre-ND result provided it meet minimum requirement. 

Unified Tertiary Matriculation Examination (UTME)

An applicant to study this programme must make a satisfactory score in JAMB coordinated UTME and post-UTME screening for the Department of Electrical and Electronics Engineering, Abia State Polytechnic.

JAMB Subjects Combination

• Mathematics 
• Physics 
• Chemistry and 
• English Language 

HND Electrical and Electronics Engineering Entry Requirements

• All applicant for HND Electrical and Electronics Engineering must satisfy minimum entry requirement for ND programme as stated above.

• National Diploma (ND): minimum of lower credit with CGPA not lesser than 2.50

• Prove of completion of mandatory one (1) year post-ND industrial training.

• ND with pass not lesser than CGPA 2.00 and with industrial work experience not lesser than two years.

• Transcript from former school if an applicant  is not from Abia State Polytechnic.

Note: ND and HND Electrical and Electronics Engineering run for a minimum duration of two years (4 semesters) each and maximum duration of four (4) years (8 semesters)

Share This

Computer Engineering Entry Requirements Abia State Poly

Abia State Polytechnic, School of Engineering Technology only offers four programmes among which is Computer Engineering Technology.

The school applied hand-on work to teaching and learning, imparting their students with skill needed to excel as Computer Engineering technicians and technologist able to work efficiently in the area of computer hardware design, installation and repair and in the area of software development with little or no supervision.

Listed on the page is entry requirements to study ND and HND Computer Engineering Technology at School of Engineering Technology, Abia State Polytechnic. This include the WAEC O'level and JAMB subjects combination. 

ND Computer Engineering Entry Requirements 

Department of Computer Engineering, Abia State Polytechnic accept minimum of five (5) credit passes in the following O'level subjects: 

WAEC Subjects Combination

• Mathematics 

• English Language 

• Physics

• Chemistry and one of 

• Technical Drawing

• Geography 

• Further Mathematics

• Auto Mechanic 

• Basic Electricity/Basic Electronics

• Metal Work 

• Economic/Commerce 

• Biology/Agricultural Science

The five subjects must be at not more than two sittings from one or two of the following: 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

Abia State Polytechnic accept pre-ND result provided it meet minimum requirement. 

Unified Tertiary Matriculation Examination (UTME)

An applicant to study Computer Engineering must make a satisfactory score in JAMB coordinated UTME and post-UTME screening for the Department of Computer Engineering, Abia State Polytechnic.

JAMB Subjects Combination

• Mathematics 
• Physics 
• Chemistry and 
• English Language 

HND Computer Engineering Entry Requirements

• All applicant for HND Computer Engineering must satisfy minimum entry requirement for ND programme as stated above.

• National Diploma (ND): minimum of lower credit with CGPA not lesser than 2.50

• Prove of completion of mandatory one (1) year post-ND industrial training.

• ND with pass not lesser than CGPA 2.00 and with industrial work experience not lesser than two years.

• Transcript from former school if an applicant  is not from Abia State Polytechnic.

Note: ND and HND Computer Engineering run for a minimum duration of two years (4 semesters) each and maximum duration of four (4) years (8 semesters)

Share This

Mechanical Engineering and Entry Requirements Abia State Poly

Abia State Polytechnic, School of Engineering Technology only offers four programmes among which is Mechanical Engineering Technology.

The school applied hand-on work to teaching and learning, imparting their students with skill needed to excel as Mechanical Engineering technicians able to undertake any machines design, development and repair project with little or no supervision.

Listed on the page is entry requirements to study ND and HND Mechanical Engineering Technology at School of Engineering Technology, Abia State Polytechnic. This include the WAEC O'level and JAMB subjects combination. 

ND Mechanical Engineering Entry Requirements 

Department of Mechanical Engineering, Abia State Polytechnic accept minimum of five (5) credit passes in the following O'level subjects: 

WAEC Subjects Combination

• Mathematics 

• English Language 

• Physics

• Chemistry and one of 

• Technical Drawing

• Geography 

• Further Mathematics

• Auto Mechanic 

• Basic Electricity/Basic Electronics

• Metal Work 

• Economic/Commerce 

• Biology/Agricultural Science

The five subjects must be at not more than two sittings from one or two of the following: 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

Abia State Polytechnic accept pre-ND result provided it meet minimum requirement. 

Unified Tertiary Matriculation Examination (UTME)

An applicant to study Mechanical Engineering must make a satisfactory score in JAMB coordinated UTME and post-UTME screening for the Department of Mechanical Engineering, Abia State Polytechnic.

JAMB Subjects Combination

• Mathematics 
• Physics 
• Chemistry and 
• English Language 

HND Mechanical Engineering Entry Requirements

• All applicant for HND Mechanical Engineering must satisfy minimum entry requirement for ND programme as stated above.

• National Diploma (ND): minimum of lower credit with CGPA not lesser than 2.50

• Prove of completion of mandatory one (1) year post-ND industrial training.

• ND with pass not lesser than CGPA 2.00 and with industrial work experience not lesser than two years.

• Transcript from former school if an applicant  is not from Abia State Polytechnic.

Note: ND and HND Mechanical Engineering shall run for a minimum duration of two years (4 semesters) each and maximum duration of four (4) years (8 semesters)

Share This

Welding and Fabrication Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Welding and Fabrication Engineering Technology.  

The Welding and Fabrication Engineering Technology is taught at just eleven (7) Nigerian polytechnics among which is Delta State Poly OGWASHI-UKU.

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Welding and Fabrication Engineering Technology, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Welding and Fabrication Technology Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics
• English Language
• Chemistry
• Physics and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce  '
• Statistics 
• Woodwork 
• Fine Art

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Welding and Fabrication Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Welding and Fabrication Technology Entry Requirements

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years of industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Share This

Metallurgical Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Metallurgical Engineering Technology. 

Delta State Poly OGWASHI-UKU is one of the seven polytechnics where this programme is offered in Nigeria, though it is taught at many universities.

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Metallurgical Engineering Technology, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Metallurgical Engineering Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics
• English Language
• Chemistry
• Physics and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Metallurgical Engineering Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Metallurgical Engineering Entry Requirements

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years of industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Share This

Civil Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Civil Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Civil Engineering, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Civil Engineering Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics
• English Language
• Chemistry
• Physics and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Civil Engineering, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Civil Engineering Entry Requirements

Not available at this time

Share This

Computer Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Computer Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Computer Engineering, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Computer Engineering Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics
• English Language
• Chemistry
• Physics and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Computer Engineering, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Computer Engineering Entry Requirements

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years of industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Share This

Electrical Electronics Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Electrical and Electronics Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Electrical and Electronics Engineering Technology, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Electrical and Electronics Engineering Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics 
• Physics
• Chemistry 
• English Language and one of

• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Electrical and Electronics Engineering Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Electrical Electronics Engineering Entry Requirements.

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years of industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Note: Applicants for this programme are eligible to choose Electronic Communications option.

Share This

Chemical Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Chemical Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Chemical Engineering, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Chemical Engineering Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics 
• Physics 
• Chemistry 
• English Language and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Chemical Engineering Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Chemical Engineering Entry Requirements

Not available at this time.

Share This

Foundry Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Foundry Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Foundry Engineering Technology, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Foundry Engineering Technology Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics 
• Physics 
• Chemistry 
• English Language and one of
• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department of Foundry Engineering Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Foundry Engineering Entry Requirements

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years of industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Share This

Mechanical Engineering Entry Requirements Delta State Poly OGWASHI-UKU

The Delta State Polytechnic is three (3) in numbers and that of  OGWASHI-UKU is one of them. They are all owned by the Delta State government. However the one at UZORO have been upgraded to a degree awarding institution.

The Delta State Polytechnic OGWASHI-UKU, is made up of four (4) schools one of which is the School of Engineering and Technology. 

The school parades nine departments, awarding ND and HND in nine different engineering disciplines including Mechanical Engineering Technology. 

Detailing on this page are the minimum entry requirements accepted to study for the ND and HND at the Department of Mechanical Engineering Technology, Delta State Polytechnic OGWASHI-UKU. This includes the WAEC and JAMB subjects combination.  

ND Mechanical Engineering Technology Entry Requirements

Five (5) O'level credit passes from the following subjects: 

WAEC Subjects Combination

• Mathematics 
• Physics 
• Chemistry 
• English Language and one of

• Biology/Agricultural Science
• Technical Drawing,
• Basic Electronics/Basic Electricity,
• Auto Mechanics,
• Metal Work,
• Further Mathematics
• Geography,
• Economics/Commerce 

The five subjects must be at not more than two sittings from one or two of the following O'level examination qualifications. 

• West African Senior School Certificate (WASSCE)
• Senior School Certificate Examination (SSCE)
• General Certificate of Education (GCE O'level) or
• NABTEB

An applicant for this programme must sit for, pass and make the required cut off mark for JAMB and post-UTME screening for the Department not Mechanical Engineering Technology, Delta State Polytechnic OGWASHI-UKU.

JAMB Subjects Combination

• Mathematics 
• English Language
• Chemistry 
• Physics/Technical Drawing and 

HND Mechanical Engineering entry Requirements

• O'level results as stated for the ND above

• Natiomal Diploma (ND) with at least lower credit 

• Evidence of completion of mandatory post-ND industrial training. 

• ND letter of admission or JAMB result for ND admission must be submitted.

• Pass in ND result would be considered for admission but with nothing lesser than two (2) years industry work experience.

• Transcript from former attended school. This is applicable to those coming from other polytechnics. 

Note: HND mechanical Engineering students are eligible to choose from two options which are: Power Plant  and  Manufacturing Production

Manufacturing! Production.

Share This